Table of Contents
Advertisement
T10FM
Fig. 4.3: Rotor installation (horizontal)
4.5 Mounting the rotor
IMPORTANT
For correct operation, comply with the mounting dimensions
(particularly the area free of metal, see Page 44).
Additional installation notes for the speed measuring system can be found in
Chapter 4.8, Page 24.
NOTE
Usually the rotor identification plate is no longer visible after
installation. This is why we include with the rotor additional stickers
with the important ratings, which you can attach to the stator or any
other relevant test‐bench components. You can then refer to them
whenever there is anything you wish to know, such as the calibration
signal.
A0894-5.2 en
17
HBM
Advertisement
Table of Contents
