CONTROLS AND EQUIPMENT
Parking brake lever
The parking brake lever is
between the front
seats.
Setting the Parking Brake:
Pull up
the
lever
until
strong
resistance
is
felt.
The parking brake must be pulled
up
al
l
the
way to
ensure
that
the vehicle
cannot
move. When the ignition is
on,
the
brake
warning light wil
l
illuminate.
Releasing the Parking Brake:
1
-Press and
hold
the
brake
pedal whi le re-
leasing the parking brake.
2
-Slightly
pu
ll
up the lever.
3
-
Press
the release button (arrow)
.
4- Push the lever all the way down.
When the parking brake
is
fu lly
released,
the brake
warning
light wi ll turn
off.
Notes
•
If you should drive faster than 4
mph
(6 km/h) with the parking brake
still
engaged,
you
w
ill
hear
a
warning chime ir
addition to
the
warning
light.
•
When the ignition is switched on
and the
hand brake is not fully released,
the
daytime
running lights (low beam with
reduced
brightness) will not light
up!
~WARNING
• Always
release
the
parking
brake fully.
A partially engaged
brake
will
overheat
the
rear
brakes,
reduce their effective-
ness, and cause excessive wear_
This could lead to brake failure
and an
accident.
•
Always set the parking brake
when parking your vehicle.
• Move the selector lever to "P"
(automatic transmission) or move
the gearshift lever to "R" or "1"
(manual
transmission).
•
When parking on hills, also turn
the wheels so that the front
wheels will first run into the curb
if the vehicle starts to roll.
-
parking headed downhill, al-
ways turn the front wheels to-
ward the curb.
- parking headed uphill, always
turn the front wheels away from
the curb.
• Do not leave children unat-
tended in the vehicle. A child
could release
t
he parking brake
and
I
or move the selector
I
gear-
shift lever and allow the vehicle to '
move causing an accident and per-
sonal
injury.
118
-
-- - - - - - - - -
--
--
-
--
-
--
ON THE ROAD