Volkswagen Jetta Wagon 2004 Owner's Manual page 246

CONTROLS AND EQUIPMENT
The head restraints can be stored to save
place after they have been removed . To do
this, the rods on the restraints can be in-
serted in the appropriate openings in the
rear seat cushions.
Folding the seat bench back
into place
• Pull the backrest up until it latches
securely into place .
• Sw ing the seat cushion back in place and
push it all the way back. Then push down
the front part of the cushion until it latches
into place.
When folding the backrest back into
place, make sure the safety belt
doesn't get caught, because it can
be damaged and weakened.
~WARNING
• The backrest must always be se-
curely latched so that the safety
belts can work properly to help
protect all back seat passengers.
• Objects stored in the luggage
compartment will not fly forward
during sudden braking.
• Never allow safety belts to be-
come damaged by being caught in
door or seat hardware.
• Torn or frayed safety belts can
tear and damaged belt hardware
can break in an accident. Inspect
belts periodically.
If belts show damage to webbing,
bindings, buckles, or retractors,
have them replaced.
78 - - - - - - - - - - - -- - - -- SEATS AND STORAGE