Appendix; New And Extended Functions - Siemens SINAMICS G120D Operating Instructions Manual

Appendix

A.1

New and extended functions

Table A- 1 New functions and function changes in firmware 4.7 SP6
Function
1 Support for the Power Module PM240-2, FSF frame sizes
Support for safety functions Safe Torque Off (STO) via the
terminals of the Power Module PM240-2 FSF frame size
You can find additional information in the "Safety Integrated"
function manual.
Overview of the manuals (Page 347)
2 Support for Power Module PM330 JX frame size
3 Support for 1PC1 induction motors
4 The control of synchronous reluctance takes into account the
inductance of the output reactor.
5 Support for motor temperature sensor PT1000
6 New p4621 parameter for disabling PTC short-circuit monitoring
7 Revision of the thermal motor model for protecting the motor
against damage due to overheating in the stator or rotor
8 Changing the quick commissioning in the "Standard Drive Con-
trol" application class:
The motor data identification is no longer permanently set to
p1900 = 12; instead, users select the appropriate motor data
identification.
Factory setting: p1900 = 2.
9 The free function blocks are also available in the SINAMICS
G120C.
Converter with control units CU240D-2
Operating Instructions, 07/2016, FW V4.7 SP6, A5E34262100B AD
Changes in this manual (Page 5)
SINAMICS
G120
- - ✓ ✓ ✓
- - - - ✓
- - ✓ - -
✓ ✓ ✓ ✓ ✓
- - ✓ - -
✓ ✓ ✓ ✓ ✓
- - - - -
✓ ✓ ✓ ✓ ✓
- ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓
A
G120D
✓ - - -
✓ - - -
- - - -
✓ ✓ ✓ ✓
- - - -
✓ ✓ ✓ ✓
- ✓ ✓ ✓
✓ ✓ ✓ ✓
✓ - - -
✓ ✓ - -
321