Specify deadband
Small signals of a few millivolts are often corrupted by interference in the cable. To be able
to enter a setpoint of exactly 0 V via an analog input, you must specify a deadband.
Image 6-4
p0764[0]
p0764[1]
Using an analog input as digital input
An analog input can also be used as digital input.
Converter with control units CU240D-2
Operating Instructions, 07/2016, FW V4.7 SP6, A5E34262100B AD
Deadband of the analog input
Skip frequency band of the analog input AI 0 (factory setting: 0)
Skip frequency band of the analog input AI 1 (factory setting: 0)
Digital inputs (Page 112)
Advanced commissioning
6.2 Inverter control
117