Drive-Cliq Interface - Siemens SIMOTION Equipment Manual

Interfaces

4.2 DRIVE-CLiQ interface

4.2 DRIVE-CLiQ interface
Properties
DRIVE-CLiQ has the following properties:
• Automatic detection of components by the Control Unit
• Independent expansion of components possible
• Standardized interfaces to all components
• Uniform diagnostics down to the components
• Complete service down to the components
• Mechanical parts are easy to use
For the DRIVE-CLiQ interface, 24 V / 450 mA are available to connect encoders and measuring
systems.
Interface characteristics
Table 4-3
Characteristic
Connector type
Maximum cable length
Data rate
Connector type: RJ45 socket; blanking cover for DRIVE-CLiQ interface included in the scope of delivery;
blanking cover (50 pieces) Article number: 6SL3066-4CA00-0AA0)
Interface assignment
Table 4-4 Interface assignment X100
Representation Pin
1
B
2
8
3
1
4
A
5
6
7
8
A
B
Signal type: I = Input; O = Output; VO = Voltage Output
48
Interface X100
Type
DRIVE-CLiQ connector
100 m
100 Mbits
Name
TXP
TXN
RXP
Reserved, do not use
Reserved, do not use
RXN
Reserved, do not use
Reserved, do not use
+ (24 V)
M (0 V)
Signal type Description
O Transmit data +
O Transmit data -
I Receive data +
- -
- -
I Receive data -
- -
- -
VO Power supply
VO Electronic ground
Equipment Manual, 07/2021, A5E33446720B
SIMOTION D410-2