Switching Between Rtc Operation (Rtc/Vrv/Fresh Air) - ABB i-bus KNX Yucus YUB/U1.0.1 Series Technical Reference Manual

KNX Technical Reference Manual
ABB i-Bus ® KNX Yucus

Switching between RTC operation (RTC/VRV/Fresh Air)

9.4
The function of switching between operation would only be available when multiple pages
function is activated for display in the "Page Setting" parameter. The operation page that
is not selected from the "Page Setting" will not be displayed when switching between
operation is trigger. When the desired operation page is selected and remain for more
than 3 sec, the display operation page is automatic confirms and will remain on the
selected operation page until the next operation page selection is activated. For example,
after the user has selected to adjust the temperature on the VRV operation page, the
operation page will remain on the VRV operation page until the next operation page
selection is activated.
Operation logic of the display page
Display RTC operation page
page
operating
RTC
sequences
Up/down Adjustment of
button temperature
Fan button Fan speed
adjustment
(auto, 1, 2, 3, 4,
5)
Menu button Enter into
short press operation state
(heating/cooling)
selection,
blinking of icon
Menu button On or off RTC
long press function
RTC operation RTC mode
state selection selection
Heating / cooling Comfort /
selection ECO mode
selection
Confirm Confirm
selection, blinking selection,
stop blinking
stop
Enter into mode Enter into
selection, blinking VRV
of icon operation
page
On or off RTC On or off
function RTC
function
VRV operation page
VRV VRV
selection
Adjustment of VRV Adjustment
temperature operation
(Fan/heating/cooling/Auto/
Dehumidification)
Fan speed adjustment Confirm selection, blinking
(auto, 1, 2, 3, 4, 5) stop
Enter into operation Enter
state operation page
(heating/cooling/fan)
selection, blink of icon
On or off VRV function On or off VRV function
Fresh
operation page
operation state Fresh air
of VRV Not applicable
state
Fan speed
adjustment (off,
1, 2, 3, 4, 5)
into Fresh air Enter into RTC
operation page
On or off Fresh
air function
air
23