Application "Common Function - Priority - ABB i-bus KNX Yucus YUB/U1.0.1 Series Technical Reference Manual

KNX Technical Reference Manual
ABB i-Bus ® KNX Yucus
Note: This object is only adjustable if the "Cyclical sending" parameter is set to
"Activate for specified value" or "Activate except for specified value".
The parameter "Value for cyclical sending" specifies which value must be receive on the
"Input" object so that the same value is cyclically sent out on the output. The value options
are dependent on the setting of the " Value for cyclical sending " parameter.
1 bit: switching functions (e.g. On/Off, enable/blocked, true/untrue)
– 1 bit: switching functions (e.g. On/Off, enable/blocked, true/untrue)
– 1 byte 0 - 100%: percentage values (0 = 0%, 255 = 100%)
– 1 byte 0 - 255: arbitrary values from 0 to 255
– 2-byte float: floating point value (physical values such as temperature or brightness) -
671088.64 to 671088.64
– 2-byte signed: arbitrary values from -32768 to +32767
– 2-byte unsigned: arbitrary values from 0 to 65,535
– 4-byte float: floating point value (physical values) -4000000 to 4000000
– 4-byte signed: arbitrary values from -2147483648 to 2147483647
– 4-byte unsigned: arbitrary values from 0 to 4294967295
12.24.8 Object no
Object name
Input
Input
Input
Input
Input
Input
Input
Input
Input
Output
Output
Output
Output
Output
Output
Output
Output
Output
Application
activate/deactivate GO

Application "Common function - Priority"

12.25
The "Priority" application has 3 communication objects, a 1-bit object "Switch input", a 2-
bit object "Input priority" and a 1-bit object "Output". The telegrams received on the
"Switch input" are transferred to the "Output" depending on the state of the
Data type
1 bit DPT 1.001
1 byte DPT 5.001
1 byte DPT 5.010
2 byte DPT 9.xxx
2 byte DPT 8.001
2 byte DPT 7.001
4 byte DPT 14.xxx
4 byte DPT 13.001
4 byte DPT 12.001
1 bit DPT 1.001
1 byte DPT 5.001
1 byte DPT 5.010
2 byte DPT 9.xxx
2 byte DPT 8.001
2 byte DPT 7.001
4 byte DPT 14.xxx
4 byte DPT 13.001
4 byte DPT 12.001
1 bit DPT 1.001
Flags
C, W
C, W
C, W
C, W
C, W
C, W
C, W
C, W
C, W
C, T
C, T
C, T
C, T
C, T
C, T
C, T
C, T
C, T
C, W
78