Application "Lcd Backlight - ABB i-bus KNX Yucus YUB/U1.0.1 Series Technical Reference Manual

KNX Technical Reference Manual
ABB i-Bus ® KNX Yucus
This parameter is used to specify the duration to trigger off command after activating
primary function.
12.4.10 Object no
Object name
ES: Energy saving state
ES: Energy Saving – Primary
function Send Value
ES: Energy Saving – Primary
function Send Value
ES: Energy Saving – Primary
function Send Value
ES: Energy Saving – Primary
function Send Value
ES: Energy Saving – Primary
function Send Value
ES: Energy Saving – Primary
function Send Value
ES: Energy Saving – Primary
function Send Value
ES: Energy Saving – Primary
function Send Value
ES: Energy Saving – Primary
function Send Value
ES: Energy Saving/Primary
activate/deactivate GO

Application "LCD backlight"

12.5
The control element has an LCD display that indicated the current operating status and
digital label of the rocker. For RTC version, the LCD display will indicate the operation of
the of the room temperature controller, RTC use simple symbol for easy and intuitively
indication and operation.
12.5.1 Common parameter – LCD backlight sleep mode by group object
Options
This parameter is used to specify whether the LCD backlight can be activated or
deactivate by a 1 bit communication object via the bus line.
12.5.2 Common parameter – Day/night mode
Options
LCD backlight can light up with two different brightness levels. When an ON telegram is
receive, the LCD backlight lights up "bright"; when an OFF telegram is received, the LCD
backlight lights up "dark".
Data type
1 bit DPT 1.001
1 byte DPT 5.001
1 byte DPT 5.010
2 byte DPT 9.xxx
2 byte DPT 8.001
2 byte DPT 7.001
4 byte DPT 14.xxx
4 byte DPT 13.001
4 byte DPT 12.001
1 byte DPT 18.001
1 bit DPT 1.001
Inactive
1 = LCD backlight on / 0 = LCD Backlight off
1 = LCD Backlight off / 0 = LCD Backlight on
Deactivate
Activate
Flags
C, R, T
C, W, T, U
C, W, T, U
C, W, T, U
C, W, T, U
C, W, T, U
C, W, T, U
C, W, T, U
C, W, T, U
C, W, T, U
C, W, U
34