ABB i-bus KNX Yucus YUB/U1.0.1 Series Technical Reference Manual page 34

KNX Technical Reference Manual
ABB i-Bus ® KNX Yucus
– 4-byte float: floating point value (physical values) -4000000 to 4000000
– 4-byte signed: arbitrary values from -2147483648 to 2147483647
– 4-byte unsigned: arbitrary values from 0 to 4294967295
– Number of light scene 1..64: arbitrary values from 1 to 64
Note: This parameter is only visible if "Primary Function" is activated.
12.4.7 Common parameter – Value
Options
This parameter is used to specify the type of communication object data type size to be
send out by primary function when it is trigger.
Note: This parameter is only visible if "Primary Function" is activated.
12.4.8 Common parameter – Send "off" telegram automatic after delay time expire
Options
This parameter is used to specify whether to send an off command after the primary
function is trigger.
Note: This parameter is only visible if "Primary Function" is activated.
12.4.9 Common parameter – Delay time after activating energy saving mode to trigger
"Off" command (sec)
Options
– 1 bit: On/Off
– 1 byte 0 - 100%: (0%-100%)
– 1 byte 0 - 255: 0 to 255
– 2-byte float: -671088.64 to 671088.64
– 2-byte signed: -32768 to +32767
– 2-byte unsigned: 0 to 65,535
– 4-byte float: -4000000 to 4000000
– 4-byte signed: -2147483648 to 2147483647
– 4-byte unsigned: 0 to 4294967295
– Number of light scene 1..64: 1 to 64
Deactivate
Activate
Input from 0 sec to 1800 sec
33