KNX Technical Reference Manual
®
ABB-i-Bus
-KNX Millenium
11.3
Application "RTC settings"
Default settings for the internal room temperature controller can be made with the "Operating mode settings"
application.
The room temperature controller can be utilised for "Heating", "Cooling", "Heating and cooling" or for "Cooling and
heating". There is also the option of controlling fan coil actuators.
11.3.1
General parameter
General parameter
Operating as RTC extension unit
Parameters for "Temperature reading"
Operating mode for fault
Control value for fault (0 - 255)
Monitoring time current temperature (min)
Parameters for "Controller general"
Control function
Note
Depending on the setting of parameter "Control function", the associated parameters are so
individual that in the following each of the parameter blocks is listed separately for the appropriate
setting.
KNX Technical Reference Manual | 1473-1-7819
Settings
• activated
• deactivated
Settings
• Heating
• Cooling
0 ... 255
1 ... 120
Settings
• Heating
• Cooling
• Heating and cooling
• Cooling and heating
Description of applications /
Comments
–
Comments
Only available when parameter "Control
function" is set on "Heating and cooling" or
on "Cooling and heating".
–
–
Comments
–
objects
— 29 —