ABB i-bus KNX Yucus YUB/U1.0.1 Series Technical Reference Manual page 159

KNX Technical Reference Manual
ABB i-Bus ® KNX Yucus
12.35.33 Slave – General – Setpoint display - Object no
Object name
Setpoint display – (master)
Setpoint display – (slave)
This 2-byte communication object must be connected to the respective slave
communication object in order to synchronize the devices in the master/slave
configuration.
12.35.34 Slave – General – Request setpoint - Object no
Object name
Request setpoint – (master)
Request setpoint – (slave)
This 1-byte communication object must be connected to the respective slave
communication object in order to synchronize the devices in the master/slave
configuration.
12.35.35 Slave – General – Confirm setpoint - Object no
Object name
Confirm setpoint – (master)
Confirm setpoint – (slave)
This 1-byte communication object must be connected to the respective slave
communication object in order to synchronize the devices in the master/slave
configuration.
12.35.36 Slave – General – Heating / Cooling request - Object no
Object name
Heating / cooling request –
(master)
Heating / cooling request –
(slave)
This 1-bit communication object must be connected to the respective slave
communication object in order to synchronize the devices in the master/slave
configuration.
12.35.37 Slave – General – Request fan speed level manual - Object no
Object name
Request fan speed level
manual – (master)
Request fan speed level
manual – (slave)
This 1-bit communication object must be connected to the respective slave
communication object in order to synchronize the devices in the master/slave
configuration.
Data type
2 byte DPT 9.001
2 byte DPT 9.001
Data type
1 byte DPT 5.001
1 byte DPT 5.001
Data type
1 byte DPT 5.001
1 byte DPT 5.001
Data type
1 bit DPT 1.001
1 bit DPT 1.001
Data type
1 bit DPT 1.001
1 bit DPT 1.001
Flags
C, R, T
C, W, T, U
Flags
C, W, U
C, T
Flags
C, R, T
C, W, T, U
Flags
C, W, U
C, T
Flags
C, W, U
C, T
158