Application "1-Button Multiple Operation - ABB i-bus KNX Yucus YUB/U1.0.1 Series Technical Reference Manual

KNX Technical Reference Manual
ABB i-Bus ® KNX Yucus

Application "1-button multiple operation"

12.14
With the "1-button multiple actuation" application, a differentiation can be made between
a single, double, triple, quadruple or quintuple actuation of the button. For each actuation,
single, double, triple, quadruple, or quintuple, different values can be sent out. In each
case, the application "1-button multiple operation" makes a separate set of parameters
and communication objects available in each case for the right or left side of the button.
This makes multiple operation possible via one button and assigning a further "button-
oriented" function to the other button.
12.14.1 Common parameter – Number of objects or operation
Options
The application can differentiate between a single, double, triple, quadruple or quintuple
operation of the button.
The "Number of objects or actuations" parameter specifies how many multiple operations
are to be differentiate between.
– 1 object: single operation
– 2 objects: single and double operation
– 3 objects: single, double and triple operation
– 4 objects: single, double and triple and quadruple operation
– 5 objects: single, double and triple, quadruple quintuple operation
12.14.2 Common parameter – Evaluation period (sec)
Options
The application can differentiate between a single, double, triple, quadruple or quintuple
operation of the button. If the button is to recognize a multiple operation, then the button
must be operated multiple times in a relatively short period of time. The period during
which the button evaluates a multiple operation will start anew after each operation.
12.14.3 Extended parameter –Object type for object 0 to 4
Options
The "1-button multiple operation" application makes a separate communication object,
"Switching multiple operation" for single, double, triple, quadruple and quintuple operation
available in each case. The bit size of the communication objects is specify together via
the "Object type for object 0 to 4" parameter. For the most diverse applications, the bit
size of the communication objects can be adapted from "1-bit" up to "4-byte unsigned"
via "Object type for object 0 to 4". For every multiple operation function, a different object
size and thus a different function can be select.
1 to 5
Time input from 1 to 5 seconds
1 bit
1 byte 0 - 100%
1 byte (0 - 255)
2-byte float
2-byte signed
2-byte unsigned
4-byte float
4-byte signed
4-byte unsigned
53