ABB i-bus KNX Yucus YUB/U1.0.1 Series Technical Reference Manual page 53

KNX Technical Reference Manual
ABB i-Bus ® KNX Yucus
12.13.4 Extended Parameter – Sending of objects
Options
The parameter "Sending of objects" specifies whether the object values for every button
operation are sent out or only if the object values have changed since the last sending
out.
12.13.5 Extended Parameter –Object values
Options
The object values can be sent "normal" or "inverse" via their associated 1-bit
communication objects. If the parameter "Object values" is set to "inverse" then all 1-bit
communication objects of the individual levels, send out their values inverted.
12.13.6 Extended Parameter – Bit pattern of object values
Options
12.13.7 The levels can be switch in two different bit patterns:
x of n (for 5 objects, object 0 to 4)
00000
10000
11000
11100
11110
11111
12.13.8 Objects no
Object name
Switching stage 1
Switching stage 2
Switching stage 3
Switching stage 4
Switching stage 5
For change of value
For operation
Normal
Inverse
x of n
1 of n
1 of n (for 5 objects, object 0 to 4)
00000
10000
11000
11100
11110
11111
Data type
1 Bit DPT 1.001
1 Bit DPT 1.001
1 Bit DPT 1.001
1 Bit DPT 1.001
1 Bit DPT 1.001
Flags
C, W, T
C, W, T
C, W, T
C, W, T
C, W, T
52