Application "Lcd Display Sub Display - ABB i-bus KNX Yucus YUB/U1.0.1 Series Technical Reference Manual

KNX Technical Reference Manual
ABB i-Bus ® KNX Yucus
12.5.3 Common parameter – Energy saving object
Options
This 1-bit communication object can be associated with the following:
1. Energy saving state (Energy saving mode, common parameter). If an ON telegram
was receive, LCD display will be in bright illumination, if an OFF telegram was
received, LCD display will be in dark illumination.
2. Energy saving state with "Deactivate/activate LCD display" (1= LCD backlight on /
0 = LCD Backlight off) activate. If an ON telegram was receive, LCD display will
be in bright illumination, if an OFF telegram was received, LCD display will be off.
12.5.4 Common parameter – LCD backlight brightness in Energy saving function
Options
This parameter is used to specify the brightness of LCD display when control element
have energy saving mode activate after non-actuation of the control element.
12.5.5 Common parameter – LCD backlight orientation in night mode
Options
This parameter is used to specify whether will there be an orientation backlight when
control element enter into night mode.
12.5.6 Object no
Object name
LCDBL: LCD backlight sleep
mode GO
LCDBL: Day/Night mode
LCDBL: Energy saving object 1 bit DPT 1.001

Application "LCD display sub display"

12.6
For 3/6 gang, 4/8 gang, RTC and RTC with 2/4 gang version. The control element has an
option to display additional information that is obtain from the KNX bus line.
12.6.1 Common parameter – Sub display selection
Options
Deactivated
Activated
Off
Minimum
Dark
Deactivated
Activated
Data type
1 bit DPT 1.001
1 bit DPT 1.001
Inactive
Actual temperature
Humility
Pm2.5
VOC
CO2
Time
Flags
C, W, U
C, W, U
C, W, U
35