Downloading A Warp From The Projector Memory; Enabling Basic Image Blending - Christie Inspire Series User Manual

For more information about creating warp files in Twist, refer to Twist User Guide (P/N: 020-
101380-XX).
5. To send the warp settings to the projector, on the canvas, right-click a projector window and
select Send Warp.
6. To save the warp settings on the projector, click File > Save or Save As.
When removing the projector from Twist, or closing the program, the projector automatically
saves the currently applied warp settings to its warp memory.
7. To change the name when saving warps on the projector, or update the memory location of the
warp, click Properties.
The changed name shows on both Twist and the projector.
Christie Twist can be upgraded to Twist Premium and Twist Pro that provides more advanced warping
features. Refer to the Christie website (www.christiedigital.com) for product information and
documentation.

Downloading a warp from the projector memory

Use Twist to download the warp file saved on the projector memory.
1. Before downloading the previous warp file, save the warp setting to the projector memory.
2. On the canvas, click a projector window.
3. Click File > Warp.
4. In the Download from Memory Location list, select the required record.
5. To download the selected warp setting, click OK.
6. To apply the warp setting to the projector, on the canvas, right-click a projector window and
select Send Warp.

Enabling basic image blending

Configure blends directly on the projector to increase or decrease the borders of an individual
image, so it blends with a neighboring image to create a single, seamless image.
You can set blends on a projector when not using Christie Twist and Mystique. Connecting to Twist
and Mystique grays out the blend settings on the projector. Applying blends from Twist and
Mystique overwrites the blends directly set on the projectors.
1. Select Menu > Size & Position > Geometry Correction > Blend Area.
2. Choose a side to blend in with the other projectors.
3. To set up the starting position, select Start Pixel.
4. Adjust the slider by arrow keys or press ENTER to input the starting position.
5. After inputting the starting position, press ENTER.
6. To set up the size of blend area, select Pixel Height.
7. Adjust the slider by arrow keys or press ENTER to input the width of blend area.
Inspire Series User Manual
020-001934-01 Rev. 1 (11-2021)
Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.
Adjusting the image size and position
26