Table of Contents
Advertisement
Maintenance
•
Keep the probe dry and clean.
•
Clean the probe with a dry cloth, do not use liquid cleaning agents.
•
After use put the probe back in its case and store in a clean and dry place out of the sun.
•
To maintain the working life of the probe do not pull on, over twist or knot the connecting cable.
Specifications
Electrical Specification
DC + Peak AC (Maximum Differential Voltage)
Maximum Common Mode Voltage
Maximum Rated Input Voltage To Ground
Input Impedance
Input Capacitance
Probe Output Voltage Into Oscilloscope 50Ω Input
Offset Adjustment Range (Typical)
CMRR
Overload Indicator Voltage Threshold
Delay Time
Probe Load Requirement
Page 6
Bandwidth (-3dB)
Rise Time
Accuracy
Attenuation Ratio
Single Ended To Ground
Differential
Single Ended To Ground
Differential
Offset (Typical)
50Hz / 60Hz
Noise (Vrms)
BNC Cable (1m)
Overload Indicator
Power Supply
10MHz
Probe
When Overload Occurs Red Indicator Illuminates And
Wall Socket USB Power Supply 5V / 1A
Probe Specification
200 MHz (see figure 1)
< 1.75ns
+ 2%
10:1
+ 20V
+ 60V
+ 60V
500kΩ
1MΩ
< 7pF
< 3.5pF
+ 2V
+ 2mV
+ 95mV
> 80dB
> 50dB
6mV
> 20V
11ns
5ns
Buzzer Sounds
50Ω
Advertisement
Table of Contents
