Throttle Control Assembly Installation - Toro Z580 DFI Z Master Service Manual

10. Remove the z-bend end of the cable from the throttle
arm assembly (Fig. 097).
Fig 097
11. Remove the throttle cable from the unit.
Z580/Z589 DFI Z Master Service Manual

Throttle Control Assembly Installation

1. Slide the throttle cable through the slot in the side of
the control panel (Fig. 098).
IMG-0390a
2. Install the throttle cable assembly into the slot in the
control panel (Fig. 099).
CHASSIS
Fig 098 IMG-0392a
Fig 099 IMG-0393a
3
3-27