3. Remove the bearing shield (Fig. 591).
Fig 591
4. Remove the spindle housing from the spindle shaft
assembly (Fig. 592).
Fig 592
Z580/Z589 DFI Z Master Service Manual
5. Remove the seal spacer from the top of the spindle
housing (Fig. 593).
DSC-2671a
6. Remove the seal spacer from the bottom of the
spindle housing (Fig. 594).
DSC-2672a
MOWER DECKS
Fig 593
Fig 594
DSC-2673a
7
DSC-2674a
7-13