Fuel Pump Replacement
Fuel Pump Removal
1. Park the machine on a level surface, disengage the
PTO, turn the ignition switch OFF and remove the
key.
2. Raise the seat.
3. Remove the battery negative cable from the battery.
4. Turn the fuel valve to the OFF position (Fig. 497).
Fig 497
Z580/Z589 DFI Z Master Service Manual
5. Remove the cable tie around the fuel pump wires
and the wiring harness (Fig. 498).
6. Unplug the fuel pump from the wiring harness (Fig.
499).
IMG-0619a
ENGINE
Fig 498
IMG-0635a
Fig 499
IMG-0637a
5
5-29