Toro Z580 DFI Z Master Service Manual page 142

21. Remove the electric PTO clutch. Refer to "Electric
PTO Clutch Removal" on page 7-34.
22. Using a spring tool (Toro P/N 92-5771), remove the
hydraulic pump idler arm spring (Fig. 408).
Fig 408
23. Remove the belt from the hydraulic pump pulley
(Fig. 409).
Fig 409
Z580/Z589 DFI Z Master Service Manual
24. Remove the cable tie securing the throttle cable to
on the bracket behind the voltage regulator (Fig.
410).
IMG-0595a
25. Loosen the throttle cable clamp and remove the
throttle cable (Fig. 411).
IMG-0431a
ENGINE
Fig 410 IMG-0535a
Fig 411 IMG-0537a
5
5-5