11. Remove the traction pump drive belt from the pump
pulley. Lift up on the gearbox idler pulley and re-
move the belt by sliding it out around the electric
PTO clutch (Fig. 354).
Fig 354
Z580/Z589 DFI Z Master Service Manual
HYDRAULIC SYSTEM
Traction Pump Drive Belt Installation
1. Slide the traction pump drive belt over the electric
PTO clutch (Fig. 355).
PICT-3523a
2. While lifting up on the gearbox idler pulley, route the
traction pump drive belt around the pump pulley and
the engine pulley as shown (Fig. 356):
Fig 355
PICT-3523a
Fig 356
fig. 110-6220
4
4-39