19. Install the lower seal (Fig. 607).
Note: The open lip of the seal should be facing
outward.
Fig 607
20. Using a seal driver, drive or press the seal on the
lower end of the spindle housing until the seal is
flush with the outer edge of the housing (Fig. 608).
Fig 608
Z580/Z589 DFI Z Master Service Manual
21. Install the inner spacer to the spindle assembly (Fig.
609).
DSC-2692a
22. Pack the tapered bearing with #2 grease and install
the tapered bearing (Fig. 610).
DSC-2693a
MOWER DECKS
Fig 609
Fig 610
DSC-2700a
7
DSC-2694a
7-17