Motion Control Assembly Installation - Toro Z Master G3 3000 Series Service Manual

CHASSIS

Motion Control Assembly Installation

1. Install 4 new flange bushings in the LH motion
control (Fig. 204).
3
2. Install motion control lever in the LH motion control
(Fig. 205).
3-58
Fig. 204
DSCN-4487a
Fig. 205 DSCN-4488a
3. Install flat washer on motion control lever (Fig. 206).
4. Install the two spring washers with the crown side of
the washers facing out (Fig. 207).
Toro Z Master G3 3000/5000/6000 Series Service Manual
Fig. 206 DSCN-4489a
Fig. 207
DSCN-4490