Cooling Fan Replacement; Cooling Fan Removal - Toro Z580 DFI Z Master Service Manual

ENGINE

Cooling Fan Replacement

Cooling Fan Removal

1. Remove the radiator. Refer to "Radiator Removal"
on page 5-19.
2. Remove the 6 bolts, washers, nuts on the top of the
rear guard assembly and the 2 bolts and nuts at the
bottom of the rear guard assembly (Fig. 487).
Note: The 2 top bolts and the 2 bottom bolts are
different lengths than the 4 center bolts.
5
5-26
Fig 487 IMG-0491a
3. Remove the rear guard assembly from the unit (Fig.
488).
Fig 488
4. Remove the 4 bolts, washers and nuts retaining the
fan assembly to the bottom radiator plate (Fig. 489).
Fig 489
Z580/Z589 DFI Z Master Service Manual
IMG-0496a
IMG-0497a