Toro Z580 DFI Z Master Service Manual page 91

HYDRAULIC SYSTEM
15. Remove the hose clamp located on the hydraulic
suction hose coming from the oil filter (Fig. 245).
4
16. Remove the hydraulic suction hose from the fitting
on top of the hydrostatic pump (Fig. 246).
Note: When removing hydraulic hoses from the
pump, cap the hose end and the fitting on the
hydrostatic pump to ensure dirt and debris
does not enter the system.
4-4
Fig 245 PICT-3202a
Fig 246 PICT-3203a
17. Raise the rear of the unit and remove both right and
left rear tires.
18. Mark or tag the wheel motor hydraulic hoses and
fittings to ensure they are reconnected correctly.
19. Remove the two hydraulic hoses from the RH wheel
motor (Fig. 247).
Fig 247
20. Cap the hydraulic hoses and fittings (Fig. 248).
Fig 248
Z580/Z589 DFI Z Master Service Manual
PICT-3217a
PICT-3207a