MOWER DECKS
7. Remove the top oil seal from the spindle housing
(Fig. 595).
8. Remove the tapered roller bearing from the top of
the spindle housing (Fig. 596).
7
7-14
Fig 595
DSC-2675a
Fig 596
DSC-2676a
9. Remove the spacer (Fig. 597).
Fig 597
10. Turn the spindle housing over and remove the oil
seal from the bottom of the spindle housing (Fig.
598). Note the orientation of the lower oil seal. The
open end of the seal faces outwards to help relieve
pressure from over-greasing the spindle assembly.
Fig 598
Z580/Z589 DFI Z Master Service Manual
DSC-2677a
DSC-2679a