HYDRAULIC SYSTEM
5. Position the hose clamp to secure the oil cooler hose
to the tank fitting barb (Fig. 384).
4
6. Install the hydraulic filter hose to the fitting on the
bottom of the hydraulic reservoir (Fig. 385).
4-48
Fig 384
PICT-3396a
Fig 385
PICT-3401a
7. Route the mower deck belt around the PTO drive
pulley (Fig. 386).
Fig 386
8. Hook the idler spring from the mower deck idler arm
to the spring post using a spring tool (Toro p/n: 92-
5771) (Fig. 387).
Fig 387
Z580/Z589 DFI Z Master Service Manual
IMG-0627a
PICT-3391a