ELECTRICAL
Oil Pressure Switch
Purpose
The oil pressure switch completes the circuit that activ-
ates the hour meter and the radiator fan relay.
Location
The oil pressure switch is located on the lower left side
of the engine block, next to the engine oil filter (Fig. 535).
6
6-14
Fig 535
IMG-0683a
How It Works
When the engine oil pressure builds, the switch closes
to complete the circuit for both the hour meter and the
cooling fan relay (Fig. 536).
Fig 536
Testing
The switch can be tested with an ohmmeter. There
should be no continuity between the wire terminal and
ground with the engine not running. There should be
continuity between the wire terminal and ground when
the engine is running.
Z580/Z589 DFI Z Master Service Manual
IMG-0690a