Motion Control Assembly Replacement
Motion Control Assembly Removal
Chassis: Service and Repairs
g321537
1.
Bolt
2.
Motion Control Linkage
1. Park the machine on a level surface and disengage the PTO. Stop the
engine, wait for all moving parts to stop, and remove key.
2. Disconnect the battery by removing the negative cable first, then the positive
cable from the battery.
3. Raise and support the unit so that the drive wheels are off the ground.
Note: The console must be removed for access.
4. Remove the 2 bolts securing the motion control handle to the motion control
assembly.
5.
Disconnect the motion control damper from the motion control assembly.
6. Disconnect the motion control linkage from the motion control assembly.
7. Disconnect the motion control assembly from the frame.
Figure 52
3.
Motion Control Damper
Page 5–26
Titan Service Manual
3438-774 Rev A