CHASSIS
25. Remove the left hand control rod assembly (Fig.
193).
3
26. Remove the 2 bolts and nuts securing the side
flange bearing to the inside of the traction frame
(Fig. 194).
3-54
Fig 193
PICT-3133a
Fig 194
PICT-3128a
27. Remove the left hand motion control assembly and
left hand control shaft arm assembly (Fig. 195).
Fig 195
28. Inspect the side flange bearings. Replace if worn or
damaged (Fig. 196).
A
B
Fig 196
A. Side flange bearing (2)
B. Left hand motion control assembly
C. Neutral switch (on reverse side)
D. Control shaft arm
Z580/Z589 DFI Z Master Service Manual
PICT-3135a
D
A
C
PICT-3137a