Disconnect; Display Ftp Client Configuration - HP 6125G Command Reference Manual

disconnect

Syntax
disconnect
View
FTP client view
Default level
3: Manage level
Parameters
None
Description
Use disconnect to disconnect from the remote FTP server but remain in FTP client view.
This command is equal to the close command.
Examples
# Disconnect from the remote FTP server but remain in FTP client view.
[ftp] disconnect
221 Server closing.
[ftp]

display ftp client configuration

Syntax
display ftp client configuration [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ftp client configuration to display the source IP address configuration of the FTP client.
This command displays the source IP address configuration of the FTP client. If the specified source IP
address is active, this command displays the source IP address. If the specified source interface is active,
this command displays the source interface.
64