Network Settings - Mitsubishi Electric AE-200A Instruction Book

2-3. Network settings

[1] Setting the IP address of the PC
Follow the instructions below to set the PC's IP address to connect the Integrated Centralized Control Web and
multiple centralized controllers.
The PC's IP address must have the same network address as the AE-200/AE-50/EW-50's IP address.
(1) Click [Control Panel] in the Start menu.
(2) Click [Network and Sharing Center]>[Local Area Setting].
In the [Local Area Connection Status] window, click [Properties].
(3) Click [Internet Protocol Version 4 (TCP/IPv4)] to select it, and click
[Properties].
WT07996X02
14