Mitsubishi Electric AE-200A Instruction Book page 44

[3] Air To Water (PWFY) unit group
Group name
ON/OFF
Operation
mode
Click to close the settings
screen without making any
changes.
Item Operation method
Select [ON] or
ON/OFF
[OFF].
Operation Select an operation
mode mode.
Adjust the set
Set temperature with
temperature
the
buttons.
Select [Available] or
Schedule
[Not Available].
Select [ON] or
Hold
[OFF].
Click the operation
Prohibit
item to switch the
Remote
setting between
Controller
"Prohibit" and
Operation
"Permit".
Send Click [Send].
Close Click [Close].
WT07996X02
Set temperature
Close
Turns on or off the units.
Click the desired operation mode.
[Heating], [Heating ECO], [Hot Water], [Anti-freeze], [Cooling]
The settable temperature ranges depend on the operation mode and the unit model.
Enables/Disables the schedules.
Note: When [Not Available] is set, the scheduled operations are disabled even if
Enables/Disables the Hold function. When the Hold function is enabled, the
scheduled operations are disabled.
Note: The operations that have been scheduled on the remote controller will also be
Note: [Hold type] can be specified in the [Advanced] screen in the initial settings.
Note: The Hold function can be used on the AE-200A/AE-50A/EW-50A, but not on the
The following operations or setting change can be prohibited from the local remote
controllers and when the Integrated Centralized Control Web is logged in with
general user privileges: ON/OFF, Operation mode, and Set temperature.
: Permit
Click to reflect the changes made and return to the group list.
Click to return to the group list without making any changes.
Hold
Send
Click to reflect the
changes made.
schedules are set.
disabled.
Refer to the Instruction Book (Initial Settings) for details.
AE-200E/AE-50E/EW-50E.
: Prohibit
44
Prohibit Remote
Schedule
Controller Operation
Close
Click to close the settings
screen without making any
changes.
Description
Send
Click to reflect
the changes
made.