Mitsubishi Electric AE-200A Instruction Book page 119

[2] LOSSNAY unit (ventilator) group
Group name
ON/OFF
Ventilation
mode
Close
Click to close the settings
screen without making any
changes.
Item Operation method
Select [ON] or
ON/OFF
[OFF].
Ventilation Select a ventilation
mode mode.
Adjust the fan speed
Fan Speed with the
Select [ON], [OFF],
Humidify
or [Auto].
Select [Available] or
Schedule
[Not Available].
Select [ON] or
Hold
[OFF].
Filter Sign Select [Reset] and
Reset click [Send].
Click the operation
Prohibit
item to switch the
Remote
setting between
Controller
"Prohibit" and
Operation
"Permit".
Send Click [Send].
Close Click [Close].
WT07996X02
Fan Speed
Turns on or off the units.
Note: If the units are turned off during the Night Purge operation, the Night Purge
operation will not be performed until the next day.
Click the desired ventilation mode.
[Bypass], [Heat Recovery], [Auto]
Note: This item will not appear during the Night Purge operation.
buttons.
Note: During the Night Purge operation, the fan speed can be adjusted but
not be displayed.
Switches the operation status of the humidification function.
Note: This item will not appear during the Night Purge operation.
Enables/Disables the schedules.
Note: When [Not Available] is set, the scheduled operations are disabled even if
schedules are set.
Enables/Disables the Hold function. When the Hold function is enabled, the
scheduled operations are disabled.
Note: The operations that have been scheduled on the remote controller will also be
disabled.
Note: [Hold type] can be specified in the [Advanced] screen in the initial settings.
Refer to the Instruction Book (Initial Settings) for details.
Note: The Hold function can be used on the AE-200A/AE-50A/EW-50A, but not on the
AE-200E/AE-50E/EW-50E.
Resets the filter sign. (The cumulative time will be reset.)
When resetting, ensure the check mark is displayed as "
Note: Reset the filter sign after cleaning the filter.
Note: After the filter sign is reset, it takes up to an hour to clear the filter sign display
on the local remote controllers.
The following operations or setting change can be prohibited from the local remote
controllers and when the Integrated Centralized Control Web is logged in with
general user privileges: ON/OFF and Filter Sign Reset.
: Permit
Click to reflect the changes made and return to the group list.
Click to return to the group list without making any changes.
Hold
Humidify
Send
Click to reflect the
changes made. Filter Sign Reset
Click to reset the
filter sign.
Description
: Prohibit
119
Prohibit Remote
Schedule
Controller Operation
Send
Click to reflect
the changes
made.
Close
Click to close the settings
screen without making any
changes.
Auto
".
will