Mitsubishi Electric AE-200A Instruction Book page 51

Item
Select an item to display its data in the line graph.
Note: When the display range is [Block] or [Energy Management Block], display items for line graph are not
■ Indoor unit
Display range
Address
Group
Block
Energy management
block
■ AI controller
Display range
Address
■ AHC
Display range
Address
Display items
for line graph
*1 When [Day] is selected as a date, the temperature values obtained every hour and half hour will appear.
When [Month] is selected, the average daily temperature values will appear. When [Year] is selected, the
average monthly temperature values will appear.
*2 [Outdoor Temp.] will appear only when the temperature sensor to measure the outdoor temperature is set in
the Energy Management settings for the login destination centralized controller. Refer to the Instruction Book
(Initial Settings) for settings methods.
*3 Displays display item buttons for the name of the sensor connected to the AI controller (PAC-YG63MCA).
Names can be registered in the initial settings. Refer to the Instruction Book (Initial Settings) for how to
register sensor names.
*4 "Energy Management License Pack" is required. (AE-200E/AE-50E/EW-50E only)
*5 If "Energy Management License Pack" has not been registered, only [Day] is available for selection as a Date
range. To select [Month] or [Year], "Energy Management License Pack" is required.
Note: The background of the graph will appear in red when the temperature and humidity data of the AI
reaches the lower alarm
WT07996X02
displayed.
*1 *2 *3
*3
*1 *2 *3
*5
*1 *2 *3
*4
controller (PAC-YG63MCA) are displayed and when the measurement value reaches the upper or
lower alarm threshold value that has been set in the initial settings. The background will stay in red
even when the measurement value becomes between the upper and lower threshold values. Refer to
the Instruction Book (Initial Settings) for how to configure upper and lower alarm threshold values.
When the value
threshold value
(in red)
Description
Display items for line graph
Display item
*1 *5
*1 *5
Display item
Display item
51
*1 *5
When the value reaches
the upper alarm
threshold value
(in red)