Mitsubishi Electric AE-200A Instruction Book page 65

Item
Average electric power consumption (kW) will appear in 30-minute increments in a bar graph.
Note: Every hour on the hour, the average electric power for the previous 30 minutes (30 to 59 minutes) is
Average
Note: Average electric power consumption data are stored every hour and half hour. If a power failure
electric power
Note: The graph can be displayed only when the Peak Cut method is set to "Electric Amount Count PLC"
Control level Peak Cut control level will appear in a line graph.
(2) Click [Download] to output the measurement data in a CSV format
Note: This function cannot be used on a tablet.
Item
Peakcut_[yyyy]-[mm]-[dd]_[AE No.].csv
File-name contents
[yyyy]
File name
[mm]
[dd]
[AE No.]
*1 For centralized controller No., refer to 4 "Name Display" in Chapter 1.
Row
1st
2nd
3rd
File format
4th
5th–
123
2015/06/01
Peakcut energy
Time,Power(kW),Control level
00:00,8,1
File sample
00:01,8,1
00:02,8,1
:
:
23:58,6,1
23:59,6,1
WT07996X02
displayed, and every hour on the half hour, the average electric power for the previous 30 minutes (00
to 29 minutes) is displayed.
occurs, up to 30-minute worth of data will be lost.
or "PI Controller" in the initial settings. Refer to the Instruction Book (Initial Settings) for settings
methods..
The year specified in [Measurement date]
The month specified in [Measurement date]
The date specified in [Measurement date]
Centralized controller No.
Item
File Type 123
Date yyyy/mm/dd
Target "Peakcut energy"
Measurement item "Time,Power(kW),Control level"
hh:mm (1-minute intervals), average electric power consumption, control level
Data
Note: Average electric power consumption (kW) in 30-minute period will appear in
30-minute increments.
Description
Description
Format
*1
Format
65