Filter Sign - Mitsubishi Electric AE-200A Instruction Book

2-4-4. Filter sign

A list of units whose filter sign is turned on can be displayed.
Click [Notice] in the menu, and then click [Filter sign] to access the Filter sign screen.
Group name
Unit address
Item
Controller
Group name
Unit address
Reset
Reset All
WT07996X02
Display target unit groups can be narrowed down by selecting a centralized controller.
The name of the group that the unit whose filter sign is turned on belongs to will appear.
The centralized controller No. and address of the unit whose filter sign is turned on will
appear.
Note: For address display, refer to 4 "Name Display" in Chapter 1.
Click to reset the filter sign of the group that the unit whose filter sign is turned on belongs
to.
Note: Reset the filter sign after cleaning the filter.
Click to reset all filter signs of the centralized controller selected in [Controller] at once.
Note: Reset the filter sign after cleaning the filter.
Note: After the filter signs are reset, it takes up to an hour to clear the filter sign display on
the local remote controllers.
When the filter signs are reset from the local remote controllers, it takes up to an hour
to clear the filter sign display on this screen.
81
Description
Reset All
Click to reset all displayed
filter signs of the selected
centralized controller at
once.
Controller
Click to narrow down
the units to display into
centralized controller units.
Reset
Click to reset each filter sign.