Mitsubishi Electric AE-200A Instruction Book page 71

(2) In the schedule contents settings screen, set the start time to apply to the schedule, set the operations to
be scheduled, and then click [OK].
If [Optimized Start] is selected, the operation mode and the set temperature need to be set as well.
Schedule contents settings (1/2)
Scheduled
start time
(3) After all schedule settings are completed, click [OK] on the Edit schedule settings screen.
Click to undo the changes
made and close the Edit
schedule settings screen.
Note: When setting a schedule for a block or all groups collectively, all operation modes are available for selection, but the available
operation modes depend on the unit model. The units will not operate in the selected mode not supported by the units.
Note: No need to set schedules for all operations. Set one or more necessary operations.
Note: The operation items that will appear on the screen vary, depending on the equipment type.
Note: For details about settings of each operation, refer to section 2-1-5 "Advanced settings".
WT07996X02
Delete
Click to delete
the settings.
OK
Click to confirm
the settings.
Cancel
Click to undo the changes made
and close the settings screen.
Schedule settings
Cancel
71
Schedule contents settings (2/2)
Cancel
Click to cancel the settings
and close the settings screen.
OK
Click to confirm the settings.
Scheduled
start time
Delete
Click to
delete the
settings.
OK
Click to
confirm the
settings.