Advanced Settings - Mitsubishi Electric AE-200A Instruction Book

1-1-5. Advanced settings

In the group list, selecting the group icon(s) and clicking [Advanced] in the taskbar will bring up the operation
settings screen for the selected group(s). The current operation status will appear.
Change necessary operation settings, and then click [Send] to reflect the changes. Click [Close] to return to the
previous screen without making any changes.
Note: When the setting is changed from other controllers, the operation status shown on the screen will not be updated while the
screen is open.
[1] Air conditioning unit group
Set temperature
Operation prohibition
mark
Group name
ON/OFF
Operation
mode
Interlocked
LOSSNAY
ON/OFF
Close
Click to close the settings
screen without making any
changes.
Item Operation method
Select [ON] or
ON/OFF
[OFF].
Operation Select an operation
mode mode.
Adjust the set
Set temperature with
temperature
the
buttons.
Adjust the air
direction with the
Air Direction
buttons.
Adjust the fan speed
Fan Speed with the
Interlocked
Select [ON] or
LOSSNAY
[OFF].
ON/OFF
WT07996X02
-Centrally Controlled-
Air Direction
Fan speed of
interlocked
LOSSNAY
Turns on or off the units.
Click the desired operation mode.
[Cool], [Dry], [Fan], [Heat], [Auto], [Setback]
Note: When the operation mode signals from the cooling/heating switchover model of
units are mixed (Cool and Heat), the operation mode will not change.
Note: The Setback mode can be selected on the AE-200A/AE-50A/EW-50A, but not
on the AE-200E/AE-50E/EW-50E.
Depending on settings values resulting from restrictions by device functions and
set temperature range restriction functions, temperature settings ranges may be
restricted.
Note: For the same indoor unit, when changing operation mode and set temperature
from multiple operation devices (system controllers, remote controllers), display
of outside the allowable settings range may occur.
Note: Depending on the unit model, setting in 0.5°C units and 1°C units is possible.
Note: If the indoor unit supports the dual-set-point function in the Auto mode and
when the operation mode above is set to Auto or Setback, two set temperatures
for Cool mode and Heat mode can be set. For details about the dual-set-point
function, refer to page 161.
Note: When the indoor units that support the dual-set-point function and the indoor
units that do not support the dual-set-point function exist in the same group,
only one set temperature can be set in the Auto mode.
buttons.
Turns on or off the interlocked LOSSNAY units (ventilator).
Fan Speed
Send
Click to reflect the
changes made.
Filter Sign Reset
Click to reset the
filter sign.
Description
159
Send
Click to reflect
the changes
made.
Close
Click to close the settings
screen without making any
changes.
Auto Swing
Auto