Advanced Settings - Mitsubishi Electric AE-200A Instruction Book

1-1-5. Advanced settings

In the group list, selecting the group icon(s) and clicking [Advanced] in the taskbar will bring up the operation
settings screen for the selected group(s). The current operation status will appear.
Change necessary operation settings, and then click [Send] to reflect the changes. Click [Close] to return to the
previous screen without making any changes.
Note: When the setting is changed from other controllers, the operation status shown on the screen will not be updated while the
screen is open.
[1] Air conditioning unit group
Set temperature
Group name
ON/OFF
Operation
mode
Interlocked
LOSSNAY
ON/OFF
Click to close the settings
screen without making any
changes.
Item Operation method
Select [ON] or
ON/OFF
[OFF].
Operation Select an operation
mode mode.
Adjust the set
Set temperature with
temperature
the
buttons.
Adjust the air
direction with the
Air Direction
buttons.
Adjust the fan speed
Fan Speed with the
Interlocked
Select [ON] or
LOSSNAY
[OFF].
ON/OFF
WT07996X02
Close
Fan speed of
interlocked
LOSSNAY
Turns on or off the units.
Click the desired operation mode.
[Cool], [Dry], [Fan], [Heat], [Auto], [Setback]
Note: When the operation mode signals from the cooling/heating switchover model of
Note: The Setback mode can be selected on the AE-200A/AE-50A/EW-50A, but not
Depending on settings values resulting from restrictions by device functions and
set temperature range restriction functions, temperature settings ranges may be
restricted.
Note: For the same indoor unit, when changing operation mode and set temperature
Note: Depending on the unit model, setting in 0.5°C units and 1°C units is possible.
Note: If the indoor unit supports the dual-set-point function in the Auto mode and
Note: When the indoor units that support the dual-set-point function and the indoor
buttons.
Turns on or off the interlocked LOSSNAY units (ventilator).
Air Direction
Hold
Fan Speed
Send
Click to reflect the
changes made.
units are mixed (Cool and Heat), the operation mode will not change.
on the AE-200E/AE-50E/EW-50E.
from multiple operation devices (system controllers, remote controllers), display
of outside the allowable settings range may occur.
when the operation mode above is set to Auto or Setback, two set temperatures
for Cool mode and Heat mode can be set. For details about the dual-set-point
function, refer to page 118.
units that do not support the dual-set-point function exist in the same group,
only one set temperature can be set in the Auto mode.
116
Prohibit Remote
Schedule
Controller Operation
Close
Click to close the settings
screen without making any
Filter Sign Reset
changes.
Click to reset the
filter sign.
Description
Auto
Send
Click to reflect
the changes
made.
Auto Swing