Mitsubishi Electric AE-200A Instruction Book page 109

[2] LOSSNAY unit (ventilator) group
ON
Schedule disabled *3
[3] Air To Water (PWFY) unit group and HWHP (CAHV, CRHV) unit group
ON
Energy-saving ON *2
(red)
[4] General equipment group
ON
Hold ON *7
*1 Whether or not to display the filter sign ([ON], [OFF]) can be set in the initial settings.
*2 The "Energy-saving ON" icon will appear while the Peak Cut control is performed. Even when the operation of the group is stopped due to
the Peak Cut control, the icon will appear. This icon will not appear for the HWHP (CAHV, CRHV) unit groups.
*3 If Schedule is set during Night Purge operation, then the order of priority for display will be "Night Purge ON" → "Schedule set".
Even if Schedule is disabled, the order of priority for display will be "Night Purge ON" → "Schedule disabled".
*4 The "Water temperature display" icon will not appear for the HWHP (CAHV, CRHV) unit groups.
*5 If any schedule setting is applied to a DIDO controller whose prohibition setting is enabled ("Allow operations" is set to [No operations] on the
group settings screen in the initial settings), the "Schedule set" icon will appear, but the scheduled operations will not be performed. Refer to
the Instruction Book (Initial Settings) for settings methods
*6 Initial settings can be configured in the basic settings screen on the Initial Setting Tool, LCD, or the Web browser for initial settings. Refer to
the Instruction Book (Initial Settings) for details.
*7 The "Hold ON" icon is displayed for the AE-200A/AE-50A/EW-50A, but not for the AE-200E/AE-50E/EW-50E.
Note: Icons can be changed in the group settings screen in the initial settings. Refer to the Instruction Book (Initial Settings) for settings
methods.
WT07996X02
OFF
Energy-saving ON *2 Night Purge ON
(blue)
OFF
Water temperature
display *4
OFF
Error Filter sign ON
*3 Hold ON
Error Schedule set
Hold ON *7
Error Schedule set
109
*1 *6 Schedule set *3
*7
Schedule disabled
*5 *6 Schedule disabled