Mitsubishi Electric AE-200A Instruction Book page 46

[5] HWHP (CAHV, CRHV) unit group
Group name
ON/OFF
Operation
mode
Click to close the settings
screen without making any
changes.
Item Operation method
Select [ON] or
ON/OFF
[OFF].
Operation Select an operation
mode mode.
Adjust the set
Set temperature with
temperature
the
buttons.
Select [Available] or
Schedule
[Not Available].
Select [ON] or
Hold
[OFF].
Select [Normal] or
Fan Mode
[Snow].
Click the operation
Prohibit
item to switch the
Remote
setting between
Controller
"Prohibit" and
Operation
"Permit".
Send Click [Send].
Close Click [Close].
WT07996X02
Set temperature
Close
Turns on or off the units.
Click the desired operation mode.
[Heating], [Heating ECO], [Hot Water], [Anti-freeze]
The settable temperature ranges depend on the operation mode and the unit model.
Enables/Disables the schedules.
Note: When [Not Available] is set, the scheduled operations are disabled even if
schedules are set.
Enables/Disables the Hold function. When the Hold function is enabled, the
scheduled operations are disabled.
Note: The operations that have been scheduled on the remote controller will also be
Note: [Hold type] can be specified in the [Advanced] screen in the initial settings.
Note: The Hold function can be used on the AE-200A/AE-50A/EW-50A, but not on the
This item will appear only on the operation settings screen for HWHP (CAHV) unit
groups.
The fan can be set to keep rotating even while the unit is stopped to avoid snow
accumulation on the fan guard during the winter.
Select [Normal] to stop the fan while the unit is stopped. Select [Snow] to operate the
fan even while the unit is stopped.
Note: The fan mode for CRHV units cannot be operated.
The following operations or setting change can be prohibited from the local remote
controllers and when the Integrated Centralized Control Web is logged in with
general user privileges: ON/OFF, Operation mode, and Set temperature.
: Permit
Click to reflect the changes made and return to the group list.
Click to return to the group list without making any changes.
Hold
Fan Mode
Send
Click to reflect the
changes made.
disabled.
Refer to the Instruction Book (Initial Settings) for details.
AE-200E/AE-50E/EW-50E.
: Prohibit
46
Prohibit Remote
Schedule
Controller Operation
Close
Click to close the settings
screen without making any
changes.
Description
Send
Click to reflect
the changes
made.