Mitsubishi Electric AE-200A Instruction Book page 23

[2] Monitor/Operation
This simply displays the operation status of the unit groups in the system.
It allows you to quickly grasp the operation, stopped, and error occurrence status on each floor.
All units on the 21st to 30th
floors are stopped. (Gray)
One or more units on the 11th
to 20th floors are in operation.
(Green)
One or more units on the 1st
to 10th floors are in error.
(Red)
[3] This year's electric energy consumption
This displays the electric energy consumption and outdoor temperature for all unit groups in the system.
Clicking the graph changes the screen to "Energy Use Status" of the "Energy Management" menu.
Electric energy consumption
Note: The outdoor temperature will appear only when the temperature sensor to measure the outdoor temperature is set in the
Energy Management settings for the login destination centralized controller. Refer to the Instruction Book (Initial Settings) for
settings methods.
Note: "Yearly," "Monthly," and "Daily" can be selected for the electric energy consumption displayed on the Home screen. Refer to
section 2-5-1 "Screen display settings" for settings methods. The factory default setting is "Daily."
Note: When the target electric energy is set, the target electric energy is displayed only for "Yearly" and "Monthly".
Electric energy consumption
WT07996X02
Yearly
Outdoor
temperature
Target electric energy
consumption
Monthly
Electric energy
consumption
23
One or more units on the floor
are in operation. (Green)
All units on the floor are
stopped. (Gray)
One or more units on the floor
are in error. (Red)
Outdoor temperature
Outdoor
temperature
Target electric energy
consumption