(3) Selecting all groups under the control of a given controller connected to the unit groups that are
managed by general users
(1) In the group list, click [Controller]. In the controller selection screen, select a centralized controller.
The unit groups that are under the control of the selected centralized controller will appear.
In the group list (centralized controller units), click [Select all]. All icons will appear with a checkmark and a
dark blue frame.
To cancel all group selections, click [Deselect all] or [Close] in the taskbar.
Controller
(4) Selecting all groups in a given block that are managed by general users
(1) In the group list, click [Controller]. In the block selection screen, select a block.
The unit groups that belong to the selected block will appear.
In the group list (block units), click [Select all]. All icons will appear with a checkmark and a dark blue frame.
To cancel all group selections, click [Deselect all] or [Close] in the taskbar.
Controller
(5) Selecting all groups in a given energy management block that are managed by general users
(1) In the group list, click [Controller]. In the block selection screen, select an energy management block.
The unit groups that belong to the selected energy management block will appear.
In the group list (energy management block units), click [Select all]. All icons will appear with a checkmark
and a dark blue frame.
To cancel all group selections, click [Deselect all] or [Close] in the taskbar.
Controller
WT07996X02
Group list
Controller selection
Group list
Group list
157
Groups of the selected controller
Close
Block
Groups of the selected block
selection
Close
Block
Groups of the selected energy
selection
management block
Close
Select all
Deselect
all
Select all
Deselect
all
Select all
Deselect
all