Mitsubishi Electric AE-200A Instruction Book page 97

Item
Click to download a CSV file of the metering device data.
■ File name
<When a PI controller (PAC-YG60MCA) is used>
<When a built-in Pulse Input (PI) is used>
■ File output destination
■ File format
Metering device data
*1 Each value is the cumulative value between the start date and the end date.
*2 Each value is between 0.00 and 999999.99. If the value exceeds the maximum value, it will wrap
*3 The value will not appear if the data does not exist.
*4 Each file contains the data of up to 62 days.
■ File sample
WT07996X02
"ChargeParameter"_[yyyy]-[mm]-[dd]"MCPA"[PI controller address]-
[Time period (1–5)].csv
"ChargeParameter"_[yyyy]-[mm]-[dd]"MCP"-[Time period (1–5)].csv
Note: Time periods 1 through 5 can only be set from TG-2000A or Initial Setting Tool. When
shipped from the factory, only Time period 1 is settable.
[Save destination]\[Serial No.]\"OperationalData"\"ChargeParameters"\[Date]
Row Item
1st File Type 202
2nd Data range Start date + "–" + End date
<When a PI controller (PAC-YG60MCA) is used>
"MCP" + M-NET address + "–" + Time period (1–5)
3rd MCP
<When a built-in Pulse Input (PI) is used>
"MCP" + "–" + Time period (1–5)
"No.,Date,Count value(Ch1),Count value(Ch2),Count value(Ch3),Count
4th Item
value(Ch4)"
<When a PI controller (PAC-YG60MCA) is used>
MCP address + Time period, Date, MCP 1, MCP 2, MCP 3, MCP 4
5th–
Data *1*2*3*4
66th
<When a built-in Pulse Input (PI) is used>
Time period, Date, MCP 1, MCP 2, MCP 3, MCP 4
around to zero.
202
12/19/2013-1/10/2014
MCP 50-1
No.,Date,Count value(Ch1),Count value(Ch2),Count value(Ch3),Count value(Ch4)
501,12/19/2013,190887.43,872411.43,227424.88,55515.50
501,12/20/2013,190899.16,872420.12,227428.63,55526.70
501,12/21/2013,190905.22,872442.23,227435.74,55537.90
501,12/22/2013,190910.38,878449.77,227448.19,55549.84
:
501,01/10/2014,200014.38,87950.36,227925.19,60111.63
Description
Format
97