All Parameters Measurement; User Defined Parameters - UNI-T UPO3000E Series User Manual

9.3 All Parameters Measurement

Press MEASURE all parameters, select on to measure 34 parameters
at one time, as shown below:
Measured parameters color are consistent with the current channel (source).
When "----" is shown, it indicates that the current source has no signal input,
or the measurement result is not valid (too large or too small).

9.4 User Defined Parameters

Press MEASURE user defined, the user-defined parameter selection
interface is displayed. As shown below:
Select the parameters by adjusting the Multipurpose knob, and press the
knob to confirm. For every selected parameter, a * symbol will appear in front
of the parameter.
Press the user defined F3 key to close the user defined parameter
selection menu and the parameters will be displayed at the bottom of the
screen. For convenience and immediate view of the automatic measurement
results of these parameters, up to 5 parameters can be defined at the same
time.
Users can also choose to open the measurement statistical function with
the F4 key, as shown below:
46