Measurement Display; On-Screen Display - UNI-T UT5300X+ Series User Manual

User's Manual

4. Measurement Display

This chapater includes the contents as follows.

On-screen Display


Sataus Bar

Test Result

Screenshot

Keyboard Lock

4.1 On-screen Display
When high voltage stops to output, press [Test] key to enter <Measurement> page. High voltage only can be
activated in measurement page.
<Meas Setup> page is to display the measured result and judement result;
LCD will divide into several areas to display the corresponding information when enters the test mode.
Instruments.uni-trend.com
Figure 4-1 Test Interface of Single Channel
Figure 4-2 Test Interface of Multiple Channels (Take S4A as an example)
UT5300X+ and UT5320R-SxA Series
14 / 43