7. Storage Setups and Screen Copy
As shown in Figure 2-25, press [SAVE] to access the storage menu.
You can save and recall waveforms and setup documents on the Oscilloscope's internal memory and any USB device.
You can also save and recall waveform documents and setup documents on a USB device. For setup see the table
below.
Function Menu
Save
Recall
Recorder
Close
Figure 2-25 Storage menu
Table 2-9 Storage menu
Setup
See Table 2-10
See Table 2-11
See Table 2-12
Explanatory Note
Save the current setup or waveform.
Recall a saved setup or waveform.
Record and playback a waveform.
Close the recalled waveform.
UTD1000 User Manual