Xilinx ChipScope Pro User Manual page 163

::chipscope::csejtag_tap navigate
This subcommand is used to change the state of the TAP of a device in the JTAG chain.
Note:
subcommand before calling this subcommand.
Syntax
Arguments
Table 5-35: Arguments for Subcommand ::chipscope::csejtag_tap navigate
Returns
An exception is thrown if the subcommand fails.
Example
Navigate the TAP state to Test Logic Reset and keep it in this state for five additional clock
cycles.
Back to list of all CseJtag Tcl Commands
ChipScope Pro Software and Cores User Guide
UG029 (v14.3) October 16, 2012
The JTAG target must be locked by using the
::chipscope::csejtag_tap navigate handle newState clockRepeat
microseconds
Argument Type
handle
newState
Required
clockRepeat
microseconds
%::chipscope::csejtag_tap navigate $handle $CSEJTAG_TEST_LOGIC_RESET 5
0
www.xilinx.com
::chipscope::csejtag_target lock
Description
Handle to the session that is returned by
::chipscope::csejtag_session create.
New state to navigate into.
Number of additional times to pulse the TCK pin
after entering the new state.
Number of microseconds to sleep after
navigating to the new state.
CseJtag Tcl Commands
163